Active/Hot Replacement Workflow Of The Hdd/Ssd - Fujitsu Oracle SPARC M12-2 Service Manual

Table 4-4 Active/Hot Replacement Procedure of the FANU
Work
Order
1
2
3
4
5
6
4.1.5

Active/Hot Replacement Workflow of the HDD/SSD

If the HDD/SSD to be replaced has a mirror volume configuration, see
Replacement Workflow of the HDD/SSD With a Mirror Volume
Before replacing the HDD/SSD, see
Precautions for FRU
Table 4-5
Table 4-5 Active/Hot Replacement Procedure of the HDD/SSD
Work
Order
1
2
3
4
5
6
Task
Checking the operating condition of the
system
Releasing the faulty FANU from the
system
Removing the FANU from the SPARC
M12-2/M12-2S
Installing the FANU in the SPARC
M12-2/M12-2S
Incorporating the FANU into the system
Confirming that there is no problem with
the replacement FANU
Replacement."
shows the workflow for active/hot replacement of the HDD/SSD.
Task
Checking the operating condition of the
system and the I/O device usage status
Releasing the faulty HDD/SSD from the
system
Removing the HDD/SSD from the
SPARC M12-2/M12-2S
Installing an HDD/SSD in the SPARC
M12-2/M12-2S
Incorporating the replacement HDD/SSD
into the system
Confirming that there is no problem with
the replacement HDD/SSD
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.6.2 Releasing the
"14.3.1 Removing a
"14.4.2 Installing a
"10.4.2 Incorporating the
"10.5.3 Checking the FRU Status After
Maintenance"
"Precautions for HDD/SSD
Reference
"9.2 Checking the Operation Status and
Resource Usage Status of Oracle
"9.4.2 Dynamically Releasing the
HDD/SSD From a Logical
"15.3.1 Removing an
"15.4.1 Installing an
"10.6.2 Incorporating an I/O Device Into
the Physical Partition by Using the Hot
Plug Function"
"10.5.3 Checking the FRU Status After
Maintenance"
Chapter 4 FRU Replacement Workflows
Domains"
FANU"
FANU"
FANU"
FANU"
"Active/Hot
Configuration."
replacement" in "7.1
Solaris"
Domain"
HDD/SSD"
HDD/SSD"
73