Note - If you do not remove the CMUL, the following steps are not necessary.
Loosen the fixing screws of the CMUL levers.
7.
Loosen the fixing screws (A in
Figure 17-15 Fixing Screws of the CMUL Levers
8.
Remove the CMUL.
a. Hold the CMUL levers (A in
b. Hold the CMUL at HANDLING POSITION, and remove it from the server.
448
Fujitsu SPARC M12-2/M12-2S Service Manual ・ January 2023
"NEAR to END", and then hold it at "HANDLING POSITION" (B in
17-16) on its side.
Figure
17-15) of the CMUL levers.
A
Figure
17-16), pull out the CMUL to the tip of
Figure