Table of Contents
Advertisement
Figure 2-10 Location of the System Locator
Table 2-15 Status of the System Locator
Icon
2.4.3
LEDs of Each Unit
The SPARC M12 units have LEDs mounted on them. If a unit detects a hardware
error, identify that unit by using the LED and perform maintenance work.
This section shows the LEDs on each unit and their states.
A
Name
Color
CHECK
Amber
Description
Indicates the operation status of the SPARC M12-2/
M12-2S.
- On: Hardware has detected an error.
- Off: The target SPARC M12-2/M12-2S is operating
normally. Or no power is being supplied.
- Blinking: SPARC M12-2/M12-2S specified when the
XSCF command instructing the blinking was executed.
This (locator) is used to identify the location of the
SPARC M12-2/M12-2S requiring maintenance.
Chapter 2 Understanding the System Units
29
Advertisement
Table of Contents
