Active/Cold Replacement Workflow Of The Hddbpu - Fujitsu Oracle SPARC M12-2 Service Manual

4.2.7 Active/Cold Replacement Workflow of the
HDDBPU
You can perform active/cold replacement of the HDDBPU in the following
configuration:
Configuration connecting two or more SPARC M12-2S units to a physical partition
■
Table 4-14
Table 4-14 Active/Cold Replacement Procedure of the HDDBPU
Work
Order
1
2
3
4
5
6
7
8
9
10
11
shows the workflow for active/cold replacement of the HDDBPU.
Task
Checking the operating condition of the
system and the I/O device usage status
Checking the logical domain assignment
status of CPU resources mounted in the
SPARC M12-2S requiring maintenance
Checking the logical domain assignment
status of memory resources mounted in
the SPARC M12-2S requiring maintenance
Releasing I/O resources of the SPARC
M12-2S requiring maintenance from a
logical domain
Releasing the SPARC M12-2S requiring
maintenance from the physical partition
Releasing the SPARC M12-2S requiring
maintenance from the building block
configuration
Placing the SPARC M12-2S requiring
maintenance into the cold state, and
removing the HDDBPU from the SPARC
M12-2S
Installing the HDDBPU in the SPARC
M12-2S, and placing the SPARC M12-2S
that required maintenance into the hot
state
Incorporating the SPARC M12-2S that
required maintenance into the building
block configuration
Diagnosing the SPARC M12-2S requiring
maintenance
Confirming that there is no problem with
the replacement HDDBPU
Reference
"9.2 Checking the Operation Status and
Resource Usage Status of Oracle
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
"9.3 Releasing I/O Resources From a
Logical Domain"
"9.4.3 Dynamically Releasing the
SPARC M12-2S From the Physical
Partition"
"9.6.1 Releasing the SPARC M12-2S
From the Building Block Configuration"
"16.3 Removing the HDDBPU or
"16.4 Installing the HDDBPU or
"10.4.1 Incorporating the SPARC
M12-2S Into a Building Block
Configuration"
"10.5.1 Diagnosing the SPARC M12
Hardware"
"10.5.3 Checking the FRU Status After
Maintenance"
Chapter 4 FRU Replacement Workflows
Solaris"
OPNL"
OPNL"
85