Fujitsu Oracle SPARC M12-2 Service Manual page 225

Hide thumbs Also See for Oracle SPARC M12-2:
Table of Contents

Advertisement

Each of the following sections puts together the order of work and the tasks for each
FRU into a table. For details on each task, see the reference shown in the table.
The following FRUs are subject to inactive/hot removal:
PCIe card
HDD/SSD
PCI expansion unit
6.3.1
Inactive/Hot Removal Workflow of a PCIe Card
You can perform inactive/hot removal of a PCIe card in the following configuration:
Building block configuration where two or more physical partitions are operating
Before removing a PCIe card, see
Precautions for FRU
Table 6-10
Table 6-10     Inactive/Hot Removal Procedure of a PCIe Card
Work
Order
1
2
3
4
5
6
7
8
9
10
Reduction."
shows the workflow for inactive/hot removal of a PCIe card.
Task
Checking the operating condition of the
system
Checking the usage status of the PCIe
card to be removed
Releasing the I/O resources assigned to
the PCIe card to be removed
Confirming that you can release the PCIe
card to be removed
Saving logical domain configuration
information
Powering off the physical partition
containing the SPARC M12-2S from
which to remove the PCIe card
Switching the mode switch on the OPNL
to Service
Removing the PCICS in which the PCIe
card to be removed is mounted from the
SPARC M12-2S
Removing the PCIe card to be removed,
from the PCICS
Installing a PCIe card filler in the PCICS,
and installing the PCICS in the SPARC
M12-2S
"Precautions for PCIe card
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.2.2 Checking the Assignment Status
of I/O
Devices"
"9.3 Releasing I/O Resources From a
Logical
Domain"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.1.1 Saving Logical Domain
Configuration
"9.5.1 Stopping a Specific Physical
Partition"
"2.3.2 OPNL Control
"12.3.1 Enabling the Removal of a PCIe
Card"
"12.3.2 Removing a PCIe Card or PCIe
Card
Filler"
"12.4.1 Installing a PCIe Card or PCIe
Card
Filler"
Chapter 6 FRU Removal Workflows
removal" in
"7.3
Domains"
Domains"
Information"
Function"
203

Advertisement

Table of Contents
loading

This manual is also suitable for:

Oracle sparc m12-2s

Table of Contents