Table of Contents
Advertisement
M12-2S and active/cold addition of the SPARC M12-2S.
Since active/cold addition uses physical partition (PPAR) DR, it is supported only in
a building block configuration connecting two or more SPARC M12-2S units to a
physical partition.
Before performing addition work, be sure to check the notes on maintenance work in
the Fujitsu SPARC M12 Product Notes of the XCP version used.
Each of the following sections puts together the order of work and the tasks for each
FRU into a table. For details on each task, see the reference shown in the table.
The following FRUs are subject to active/cold addition:
PCIe card
■
HDD/SSD
■
CMUU
■
Memory
■
PCI expansion unit
■
SPARC M12-2S
■
5.2.1
Active/Cold Addition Workflow of a PCIe Card
You can perform active/cold addition of a PCIe card in the following configuration:
Configuration connecting two or more SPARC M12-2S units to a physical partition
■
Before adding the PCIe card, see
Precautions for FRU
Table 5-4
Table 5-4 Active/Cold Addition Procedure of a PCIe Card
Work
Order
1
2
3
4
Expansion."
shows the workflow for active/cold addition of a PCIe card.
Task
Checking the operating condition of the
system
Checking the logical domain assignment
status of CPU resources mounted in the
SPARC M12-2S requiring maintenance
Checking the logical domain assignment
status of memory resources mounted in
the SPARC M12-2S requiring maintenance
Releasing the logical domain assignment
of PCIe cards mounted in the SPARC
M12-2S requiring maintenance
"Precautions for PCIe card
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
"9.3 Releasing I/O Resources From a
Logical
Domain"
Chapter 5 FRU Addition Workflows
addition" in
"7.2
Domains"
155
Advertisement
Table of Contents
