Fujitsu Oracle SPARC M12-2 Service Manual page 488

Figure 18-2 Removing a Power Cord
Remove the PCICSs from the server.
2.
Remove all the PCICSs from the server. For details, see
Removal of a PCIe
PCICSs.
Figure 18-3 Removing the PCICS
3. Remove the crossbar cables.
Remove all the crossbar cables connected to the XBU. For details, see
Removing the Crossbar
or SPARC M12-2S unit, this step is not necessary.
When using only one SPARC M12-2S unit, proceed to step 4. When using only
one SPARC M12-2 unit, proceed to step 5.
466 Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
Card." You do not need to remove the PCIe cards from the
Cable." Note that, when you use only one SPARC M12-2
"12.3.1 Enabling the
"19.3