Fujitsu Oracle SPARC M12-2 Service Manual page 229

Before performing removal work, be sure to check the notes on maintenance work in
the Fujitsu SPARC M12 Product Notes of the XCP version used.
Each of the following sections puts together the order of work and the tasks for each
FRU into a table. For details on each task, see the reference shown in the table.
The following FRUs are subject to inactive/cold removal:
PCIe card
■
HDD/SSD
■
CMUU
■
Memory
■
PCI expansion unit
■
SPARC M12-2S
■
6.4.1 Inactive/Cold Removal Workflow of a PCIe Card
You can perform inactive/cold removal of a PCIe card in the following configuration:
Configuration connecting two or more SPARC M12-2S units to a physical partition
■
Before removing a PCIe card, see
Precautions for FRU
Table 6-13
Table 6-13 Inactive/Cold Removal Procedure of a PCIe Card
Work
Order
1
2
3
4
5
6
7
8
Reduction."
shows the workflow for inactive/cold removal of a PCIe card.
Task
Checking the operating condition of the
system
Releasing the assignment of the I/O
resources of the PCIe card to be removed
Confirming that you can remove the PCIe
card to be removed (*1)
Saving logical domain configuration
information
Powering off the physical partition
containing the SPARC M12-2S that
houses the PCIe card to be removed
Switching the mode switch on the OPNL
to Service
Releasing the SPARC M12-2S that houses
the PCIe card to be removed, from the
building block configuration
Removing the PCICS in which the PCIe
card to be removed is mounted from the
SPARC M12-2S
"Precautions for PCIe card
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.3 Releasing I/O Resources From a
Logical Domain"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.1.1 Saving Logical Domain
Configuration
"9.5.1 Stopping a Specific Physical
Partition"
"2.3.2 OPNL Control
"9.6.1 Releasing the SPARC M12-2S
From the Building Block
"12.3.1 Enabling the Removal of a PCIe
Card"
Chapter 6 FRU Removal Workflows
removal" in "7.3
Domains"
Domains"
Information"
Function"
Configuration"
207