Table of Contents
Advertisement
Table 6-7 Active/Cold Removal Procedure of Memory (continue d)
Work
Order
13
14
15
16
17
18
19
20
21
*1 Observe the installation rules to remove memory. For details, see
Rules."
*2 Reconfigure logical domains as required. For details, see "Chapter 3 Operations for Domain Configuration" in
the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.
*3 If the memory was removed from a SPARC M12-2S with no PCIe cards mounted, no diagnosis is necessary
(because diagnosis was performed in the previous step).
6.2.5
Active/Cold Removal Workflow of the PCI
Expansion Unit
You can perform active/cold removal of a PCI expansion unit in the following
configuration:
Configuration connecting two or more SPARC M12-2S units to a physical partition
■
Table 6-8
Task
Installing the CMU from which the
memory was removed, in the SPARC
M12-2S
Assembling the SPARC M12-2S from
which the memory was removed
Incorporating the SPARC M12-2S from
which the memory was removed into the
building block configuration
Diagnosing the SPARC M12-2S from
which the memory was removed (*3)
Diagnosing the XBU and crossbar cable,
in the building block configuration, of the
SPARC M12-2S from which the memory
was removed
Incorporating the SPARC M12-2S into the
physical partition
Switching the mode switch on the OPNL
to Locked
Checking the operating condition of the
physical partition and logical domains (*2)
Saving logical domain configuration
information
shows the workflow for active/cold removal of a PCI expansion unit.
Reference
"17.5.2 Installing the
CMU"
"17.5.3 Restoring the
Server"
"10.4.1 Incorporating the SPARC
M12-2S Into a Building Block
Configuration"
"10.5.1 Diagnosing the SPARC M12
Hardware"
"10.5.2 Diagnosing the XBU and
Crossbar
Cable"
"10.6.1 Incorporating the SPARC
M12-2S Into the Physical Partition Using
PPAR
DR"
"2.3.2 OPNL Control
Function"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.1.1 Saving Logical Domain
Configuration
Information"
"2.2 Checking the Memory Configuration
Chapter 6 FRU Removal Workflows
Domains"
199
Advertisement
Table of Contents
