Fujitsu Oracle SPARC M12-2 Service Manual page 433

If you have performed maintenance on the FANU when the server was in the
hot state, incorporate the FANU into the system as instructed in
Incorporating the FANU."
Install the front cover.
4.
For the procedure for installing the front cover to the front of the server, see
"10.1.3 Installing the Front
Note - The serial number of the server is printed on a label affixed on the front cover. Store
this cover such that it is not mixed up with the front covers of other SPARC M12 units.
If you have performed maintenance on the FANU when the server was in the hot
state, the following step is not necessary.
5. Place the server in the hot state.
Power on the server to place it in the hot state. For details on installing the power
cord on the PSU, see "10.1.1 Installing a Power
Figure 14-10 Installing the Power Cord
Cover."
Cord."
Chapter 14 Maintaining the Fan Units and Fan Backplane Unit
"10.4.2
411