Fujitsu Oracle SPARC M12-2 Service Manual page 191

Table 5-13 Inactive/Cold Addition Procedure of a PCIe Card (continued)
Work
Order
8
9
10
11
12
13
5.4.2 Inactive/Cold Addition Workflow of the HDD/SSD
You can perform inactive/cold addition of the HDD/SSD in the following configuration:
Building block configuration where two or more physical partitions are operating
■
Before adding the HDD/SSD, see
Precautions for FRU
Table 5-14
Table 5-14 Inactive/Cold Addition Procedure of the HDD/SSD
Work
Order
1
2
3
4
Task
Installing the power cords on the SPARC
M12-2S with the added PCIe card, and
incorporating it into the building block
configuration
Diagnosing the SPARC M12-2S with the
added PCIe card
Confirming that there is no problem with
the added PCIe card
Switching the mode switch on the OPNL
to Locked
Powering on the physical partition of the
added PCIe card
Assigning the I/O resource to a logical
domain
Expansion."
shows the workflow for inactive/cold addition of the HDD/SSD.
Task
Checking the operating condition of the
system
Powering off the physical partition
containing the SPARC M12-2S requiring
maintenance
Switching the mode switch on the OPNL
to Service
Releasing the SPARC M12-2S requiring
maintenance from the building block
configuration, and removing the power
cords
Reference
"10.1.1 Installing a Power
"10.4.1 Incorporating the SPARC
M12-2S Into a Building Block
Configuration"
"10.5.1 Diagnosing the SPARC M12
Hardware"
"10.5.3 Checking the FRU Status After
Maintenance"
"2.3.2 OPNL Control
"10.9.1 Starting the System With an
XSCF Command"
"3.2 Operations and Commands Related
to Logical Domain Configurations" in the
Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration
Guide
"Precautions for HDD/SSD
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.5.1 Stopping a Specific Physical
Partition"
"2.3.2 OPNL Control
"9.6.1 Releasing the SPARC M12-2S
From the Building Block
"9.8.2 Removing the Power
Chapter 5 FRU Addition Workflows
Cord"
Function"
addition" in "7.2
Domains"
Function"
Configuration"
Cords"
169