Fujitsu Oracle SPARC M12-2 Service Manual page 199

5.5.1 System-Stopped/Hot Addition Workflow of a PCIe
Card
Before adding the PCIe card, see
Precautions for FRU
Table 5-19
Table 5-19 System-Stopped/Hot Addition Procedure of a PCIe Card
Work
Order
1
2
3
4
5
6
7
8
9
10
11
5.5.2 System-Stopped/Hot Addition Workflow of the
HDD/SSD
Before adding the HDD/SSD, see
Precautions for FRU
Expansion."
shows the workflow for system-stopped/hot addition of a PCIe card.
Task
Checking the operating condition of the
system
Powering off all physical partitions
Switching the mode switch on the OPNL
to Service
Removing the PCICS from the SPARC
M12-2/M12-2S
Removing the PCIe card filler of the PCICS
Installing a PCIe card in the PCICS to
install it in the SPARC M12-2/M12-2S
Diagnosing the SPARC M12-2/M12-2S
with the added PCIe card
Confirming that there is no problem with
the added PCIe card
Switching the mode switch on the OPNL
to Locked
Powering on all physical partitions
Assigning the I/O resource to a logical
domain
Expansion."
"Precautions for PCIe card
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.5.2 Stopping All Physical
"2.3.2 OPNL Control
"12.3.1 Enabling the Removal of a PCIe
Card"
"12.3.2 Removing a PCIe Card or PCIe
Card Filler"
"12.4.1 Installing a PCIe Card or PCIe
Card Filler"
"10.5.1 Diagnosing the SPARC M12
Hardware"
"10.5.3 Checking the FRU Status After
Maintenance"
"2.3.2 OPNL Control
"10.9.1 Starting the System With an
XSCF Command"
"3.2 Operations and Commands Related
to Logical Domain Configurations" in the
Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration
Guide
"Precautions for HDD/SSD
Chapter 5 FRU Addition Workflows
addition" in "7.2
Domains"
Partitions"
Function"
Function"
addition" in "7.2
177