Non Hot-Plug 2.5-Inch Hdd/Ssd; Replacing A Non-Hot-Plug 2.5-Inch Hdd/Ssd - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state disk (SSD)
▶ Install all 2.5-inch PCIe SSDs SFF into their original slots in the PCIe SSD
extension box, see
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
7.8

Non hot-plug 2.5-inch HDD/SSD

7.8.1

Replacing a non-hot-plug 2.5-inch HDD/SSD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Phillips PH0 / (+) No. 0 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
Removing the non-hot-plug cage
Locate the defective HDD/SSD, see
hot-plug 2.5-inch HDDs/SSDs" on page
▶ Disconnect the cable from the non-hot-plug HDD/SSD 1.
▶ If applicable, disconnect the cable from the non-hot-plug HDD/SSD 2.
298
"Installing 2.5-inch HDD/SSD modules" on page
83.
49.
Upgrade and Maintenance Manual
82.
Hardware: 10 minutes
107.
50.
51.
"Extended configuration with non-
176.
218.
TX2550 M5