Fujitsu Oracle SPARC M12-2 Service Manual page 284

9.1.1 Saving Logical Domain Configuration Information
From Oracle Solaris on the control domain, you can save the logical domain system
configuration to the XSCF firmware or an XML file.
This section describes how to save the logical domain system configuration.
For details, see "10.11 Saving/Restoring Logical Domain Configuration Information
in the XSCF" or "10.12 Saving/Restoring Logical Domain Configuration Information
in an XML File" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System
Operation and Administration Guide.
Saving the configuration to the XSCF firmware
This section describes an example of saving the logical domain system configuration
to the XSCF firmware from Oracle Solaris on the control domain. The configuration is
saved with the name "ldom-config1".
# ldm list-spconfig
factory-default
# ldm add-spconfig ldom-config1
# ldm list-spconfig
factory-default
ldom-config1 [current]
*1 There is no information saved on the logical domain system configuration other than the factory-default state.
*2 The currently defined logical domain system configuration is saved with configuration name "ldom-config1".
*3 The currently defined logical domain system configuration is added with configuration name "ldom-config1".
You cannot save the logical domain system configuration with an already existing
configuration name. To save the logical domain system configuration with an
already existing configuration name, follow the procedure below.
primary# ldm list-spconfig
factory-default
ldom-config1 [current]
primary# ldm add-spconfig ldom-config1
Error: Operation failed because a configuration
named "ldom-config1" already exists on the system controller.
Before being able to save a new configuration with
this name the existing one must be removed
primary# ldm remove-spconfig ldom-config1
primary# ldm list-spconfig
factory-default
primary# ldm add-spconfig ldom-config1
primary# ldm list-spconfig
factory-default
ldom-config1 [current]
primary#
262 Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
← (*1)
← (*2)
← (*3)
← (*1)
← (*2)
← (*3)
← (*4)