Table of Contents
Advertisement
Table 5-27 System-Stopped/Cold Addition Procedure of the SPARC M12-2S (continued)
Work
Task
Order
11
Adding the added SPARC M12-2S to the
PPAR configuration list for the physical
partition that is the incorporation
destination
12
Assigning the SPARC M12-2S (system
board) to the physical partition
13
Switching the mode switch on the OPNL
to Locked (*3)
14
Registering a CPU Activation key with
the system (*4)
15
Assigning CPU core resources to the
physical partition
16
Powering on all physical partitions
17
Assigning the resources of the added
SPARC M12-2S to logical domains
*1 Before adding the SPARC M12-2S, switch the mode switch on its OPNL to Service.
*2 If the XCP firmware version on the maintenance part is different from that on the existing system, the message
"XSCF firmware update now in progress. BB#xx, please wait for XSCF firmware update complete." appears at
login to the XSCF. Then, the XCP firmware version will be automatically matched. The version matching takes
time. Execute the showlogs monitor command, and check for the "XCP update has been completed" message. The
displayed message indicates the completion of the XCP firmware update.
*3 Also switch the mode switch on the OPNL of the added SPARC M12-2S to Locked.
*4 One CD-ROM disk containing a CPU Activation certificate is provided with the system. The CPU Activation
key ordered together with the SPARC M12-2S was registered with the system before shipment.
Reference
"7.7 Creating a PPAR Configuration
List" in the Fujitsu SPARC M12-2S
Installation Guide
"7.8.1 Assigning a Physical System
Board (PSB) to a Physical Partition
(PPAR)" in the Fujitsu SPARC M12-2S
Installation Guide
"2.3.2 OPNL Control
Function"
"7.10 Registering a CPU Activation Key"
in the Fujitsu SPARC M12-2S Installation
Guide
"7.11 Assigning CPU Core Resources" in
the Fujitsu SPARC M12-2S Installation
Guide
"10.9.1 Starting the System With an
XSCF
Command"
"3.2 Operations and Commands Related
to Logical Domain Configurations" in the
Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration
Guide
Chapter 5 FRU Addition Workflows
187
Advertisement
Table of Contents
