Table of Contents
Advertisement
The following example executes the commands for releasing BB#01 in the 2BB
configuration. To restore the system after maintenance on the SPARC M12-2S, write
down the status checked in steps 1 to 7.
First, log in to the XSCF shell, and check the hardware configuration information for
the SPARC M12-2S to be released.
Check the PSB configuration and operation status of the physical partition.
1.
The following example assumes that the user logs in to the master XSCF, checks
the PSB configuration, LSB number, and operation status of PPAR ID#00, and
then checks the operation status of the PSB. Here, it is assumed that BB#01
(PSB#01-0) will be released.
XSCF> showpcl -p 0
PPAR-ID
LSB
PSB
00
00
00-0 (*2)
01
01-0 (*3)
XSCF> showboards -p 0
PSB
PPAR-ID(LSB) Assignment
---- ------------ ----------- ---- ---- ---- ------- --------
00-0 00(00)
01-0 00(01)
*1 PPAR ID#00 is running.
*2 LSB#00 is defined for PSB#00-0 of PPAR ID#00, and LSB#01 is defined for PSB#01-0.
*3 PSB#00-0 and PSB#01-0 are assigned to PPAR ID#00, and both are running.
2.
Check the status of the XSCF of the SPARC M12-2S to be released.
The following example assumes that the user logs in to the master XSCF and
confirms that the XSCF of the SPARC M12-2S to be released is in the standby
state or is the slave XSCF.
XSCF> showhardconf
SPARC M12-2S;
+ Serial:PZ51652009; Operator_Panel_Switch:Locked;
+ System_Power:On; System_Phase:Cabinet Power On;
Partition#0 PPAR_Status:Running;
BB#00 Status:Normal; Role:Master; Ver:4016h; Serial:PZ51652009;
+ FRU-Part-Number:CA20369-B17X 005AC/9999999
+ Power_Supply_System: ;
+ Memory_Size:256 GB;
(Omitted)
BB#01 Status:Normal; Role:Standby; Ver:4016h; Serial:PZ51651016; (*1)
+ FRU-Part-Number:CA20369-B17X 005AC/9999999
+ Power_Supply_System: ;
+ Memory_Size:1024 GB;
(Omitted)
Status
Running (*1)
Pwr
Conn Conf Test
Assigned
y
y
Assigned
y
y
Fault
y
Passed
Normal (*3)
y
Passed
Normal (*3)
Chapter 9 Releasing FRUs From the System
;
;
297
Advertisement
Table of Contents
