Table of Contents
Advertisement
the root complex.
In this example, delayed reconfiguration is set for the root domain guest.
primary# ldm start-reconf guest
Initiating a delayed reconfiguration operation on the ldom domain.
All configuration changes for other domains are disabled until the ldom
domain reboots, at which time the new configuration for the ldom domain
will also take effect.
Release the root complex from the control domain or root domain.
3.
Release the assignment of the root complex PCIE10 from the root domain guest.
primary# ldm remove-io PCIE10 guest
------------------------------------------------------------------------------
Notice: The ldom domain is in the process of a delayed reconfiguration.
Any changes made to the ldom domain will only take effect after it reboots.
------------------------------------------------------------------------------
4.
Restart Oracle Solaris on the control domain or root domain that is set for
delayed reconfiguration.
In this example, Oracle Solaris on the root domain guest is restarted.
primary# ldm stop-domain -r guest
------------------------------------------------------------------------------
Notice: The ldom domain is in the process of a delayed reconfiguration.
Any changes made to the ldom domain will only take effect after it reboots.
------------------------------------------------------------------------------
Reboot request sent to ldom
5.
Confirm that the root complex was released from the logical domain.
Confirm that the root complex PCIE10 was released from guest.
primary# ldm list-io
NAME
----
(Omitted)
PCIE8
PCIE9
PCIE10
PCIE11
(Omitted)
TYPE
BUS
DOMAIN
----
---
------
BUS
PCIE8
primary
BUS
PCIE9
primary
BUS
PCIE10
BUS
PCIE11
primary
Chapter 9 Releasing FRUs From the System
STATUS
------
IOV
IOV
IOV
287
Advertisement
Table of Contents
