Table of Contents
Advertisement
Figure 17-9 Removing the PCIe Cable Connectors
3.
Bundle the PCIe cables using the cable clamps of the CMUU.
Bundle the PCI0 and PCI1 cables and the PCI2 and PCI3 cables into pairs
respectively using the cable clamps (A in
cross each other.
Figure 17-10 Securing the PCIe Cables With the Cable Clamp
Caution - When removing either the CMUL or CMUU or both, be sure to bundle the
PCIe cables using the cable clamps. Removing the CMU without bundling PCIe
cables may damage the cables due to interference with the internal components.
4.
Loosen the fixing screws of the CMUU levers.
Loosen the fixing screws (A in
Note that, if you do not remove the CMUU, this step is not necessary. Proceed to
444
Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
Figure
17-10) in such a way that they
A
Figure
17-11) of the CMUU levers.
Advertisement
Table of Contents
