Table of Contents
Advertisement
Figure 17-31 Installing the Front Cover
4.
Install the XBU.
Note - For the SPARC M12-2, this step is not necessary.
Install the XBU in the server and secure it by tightening the fixing screws. For
details, see
"20.4 Installing an
is not necessary. Proceed to step 5.
Figure 17-32 Installing the XBU
5.
Install the PCIe card.
Install the PCICS to the server, and secure it by pushing down its removal levers.
Then, lower the cable support to secure the PCICS. For details, see
Installing a PCIe Card or PCIe Card
XBU." Note that, for the SPARC M12-2, this step
Filler."
Chapter 17 Maintaining the CPU Memory Unit and Memory
"12.4.1
459
Advertisement
Table of Contents
