Fujitsu Oracle SPARC M12-2 Service Manual page 214

Table 6-3 Active/Hot Removal Procedure of a PCI Expansion Unit
Work
Order
1
2
3
4
5
6
7
8
9
10
11
12
13
*1 Reassign I/O resources to logical domains as required. For details, see "Chapter 3 Operations for Domain
Configuration" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.
6.2 Active/Cold Removal Workflows
This section describes the workflows for active/cold removal of the FRUs mounted in
192 Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
Task
Checking the operating condition of the
system
Checking the usage status of the PCIe
cards mounted in the PCI expansion unit
to be removed
Releasing the I/O resources assigned to
the PCIe cards mounted in the PCI
expansion unit to be removed
Confirming that you can release the PCI
expansion unit to be removed
Releasing the link card connected to the
PCI expansion unit to be removed, from
the system
Checking the operating condition of the
physical partition and logical domains (*1)
Saving logical domain configuration
information
Switching the mode switch on the OPNL
to Service
Releasing the PCI expansion unit to be
removed and the link card
Removing the PCICS in which the link
card is mounted from the SPARC M12-2/
M12-2S
Removing the link card from the PCICS
Installing a PCIe card filler in the PCICS
from which the link card was removed,
and installing the PCICS in the SPARC
M12-2/M12-2S
Switching the mode switch on the OPNL
to Locked
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.2.2 Checking the Assignment Status
of I/O Devices"
"9.3 Releasing I/O Resources From a
Logical Domain"
"9.2.2 Checking the Assignment Status
of I/O Devices"
"9.4 Enabling the Removal of
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.1.1 Saving Logical Domain
Configuration Information"
"2.3.2 OPNL Control Function"
"11.3 Removing a Link Cable" in the PCI
Expansion Unit for Fujitsu SPARC M12 and
Fujitsu M10/SPARC M10 Service Manual
"12.3.1 Enabling the Removal of a PCIe
Card"
"12.3.2 Removing a PCIe Card or PCIe
Card Filler"
"12.4.1 Installing a PCIe Card or PCIe
Card Filler"
"2.3.2 OPNL Control Function"
Domains"
Hardware"
Domains"