Fujitsu Oracle SPARC M12-2 Service Manual page 385

Hide thumbs Also See for Oracle SPARC M12-2:
Table of Contents

Advertisement

# ldm start-domain <root domain name>
10.7.3
Incorporating the PCIe Endpoint Into the Logical
Domain
A PCIe card that is a PCIe endpoint is incorporated into the control domain or the
root domain just after replacement by the PCI Hot Plug function or other means.
After releasing the PCIe endpoint from the root domain, assign it to the logical
domain.
Note that the procedure for assigning the PCIe endpoint differs depending on
whether it is performed dynamically or statically. For details, see
Table 10-3     Procedure for Incorporating the PCIe Endpoint
Item
1
2
3
4
*1 Dynamic reconfiguration of the PCIe endpoint device is supported by the combination of XCP 2230 or later
and Oracle VM Server for SPARC 3.1.1.1 or later.
The hotplug service needs to be enabled both in the I/O domain to which the PCIe
endpoint will be assigned and in Oracle Solaris on the control domain or the root
domain from which the PCIe endpoint will be released. Enable the hotplug service by
using the following command.
# svcadm enable hotplug
1.
Set the delayed reconfiguration mode for the control domain or root domain.
Set the delayed reconfiguration mode for the control domain or root domain to
which the PCIe endpoint is assigned. In this example, the delayed
reconfiguration mode is set for the control domain. This step is not necessary
when you change the configuration dynamically.
Task
Setting the delayed reconfiguration
mode for the control domain or
root domain to which the PCIe
endpoint is assigned
Releasing a PCIe endpoint
Restarting Oracle Solaris on the
control domain or the root
domain from which the PCIe
endpoint has been released
Incorporating the released PCIe
endpoint into the logical domain
Command
ldm start-reconf
<domain-name>
ldm remove-io <name>
<domain-name>
For the control domain
shutdown -i6 -g0 -y
For the root domain
ldm stop-domain -r
<domain-name>
ldm add-io <name>
<domain-name>
Chapter 10 Setting Up the System
Table
10-3.
-: Unnecessary
Assigned
Assigned
Dynamically
Statically
(*1)
-
Necessary
Performed
Performed
-
Necessary
Performed
Performed
363

Advertisement

Table of Contents
loading

This manual is also suitable for:

Oracle sparc m12-2s

Table of Contents