Install the HDD/SSD and filler units.
3.
Install the removed HDD/SSD and filler units. For details, see
an HDD/SSD or Filler
Figure 16-12 Installing the HDD/SSD and Filler Units
16.4.2
Installing the HDDBPU in the Server
This section describes the procedure for installing the HDDBPU to the server, with
the OPNL mounted in it.
1.
Insert the HDDBPU into the server.
Fit the HDDBPU to the positioning guide (A in
the server.
Unit."
Chapter 16 Maintaining the HDD Backplane Unit and Operation Panel
"15.4 Installing
Figure
16-13), and insert it into
431