Table of Contents
Advertisement
Figure 17-21 Installing Memory (No Unevenness)
3.
Install the to cover to the CMUL.
Place the top cover on the CMUL with its key aligned with the key grooves on
both sides of the CMUL. Then, slide the top cover in the direction of the arrow
shown in
latch "clicks".
Note that this step is not necessary for the CMUU.
Figure 17-22 Installing the Top Cover on the CMUL
17.5.2
Installing the CMU
Insert the CMUL into the server.
1.
Hold the CMUL at "HANDLING POSITION" (B in
tip of "NEAR to END". Then, hold the CMUL levers (A in
insert the CMUL into the server.
Insert the CMUL into the server while taking care not to apply a load on the rear
part of the CMUL.
452
Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
Figure
17-22, and lock the latch to secure the cover. When locked, the
Key groove
Figure
17-23), insert it to the
Figure
17-23) and
Advertisement
Table of Contents
