Table of Contents
Advertisement
applied. Before using PPAR DR, be sure to see the latest version of Fujitsu SPARC M12
Product Notes.
Note - To use PPAR DR, you need to configure the system with guaranteed availability
according to "2.5 Dynamic Reconfiguration Conditions and Settings" in the Fujitsu SPARC
M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.
Note - The procedure described in this section assumes that -m unbind=resource is not used
in the deleteboard command. In this case, before executing the deleteboard command, you
need to remove resources assigned to logical domains, in addition to removing physical I/O
devices, to ensure that enough BBs will be left for the number of CPUs and the memory size.
For details, see "2.5.2 Considerations in System Operation for Dynamic Reconfiguration" in
the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.
Table 9-11
lists the procedure for dynamically releasing the SPARC M12-2S from the
physical partition.
Chapter 9 Releasing FRUs From the System
295
Advertisement
Table of Contents
