Active/Cold Replacement Workflow Of The Opnl - Fujitsu Oracle SPARC M12-2 Service Manual

Table 4-14 Active/Cold Replacement Procedure of the HDDBPU (continued)
Work
Order
12
13
14
4.2.8

Active/Cold Replacement Workflow of the OPNL

You can perform active/cold replacement of the OPNL in the following configuration:
Configuration connecting two or more SPARC M12-2S units to a physical partition
■
Before replacing the OPNL, see
Precautions for FRU
Table 4-15
Table 4-15 Active/Cold Replacement Procedure of the OPNL
Work
Order
1
2
3
4
5
6
86 Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
Task
Incorporating the SPARC M12-2S that
required maintenance into the physical
partition
Incorporating I/O resources of the SPARC
M12-2S requiring maintenance into a
logical domain
Checking the operating condition of the
system and the I/O device usage status
Replacement."
shows the workflow for active/cold replacement of the OPNL.
Task
Checking the operating condition of the
system and the I/O device usage status
Checking the logical domain assignment
status of CPU resources mounted in the
SPARC M12-2S requiring maintenance
Checking the logical domain assignment
status of memory resources mounted in
the SPARC M12-2S requiring maintenance
Releasing I/O resources of the SPARC
M12-2S requiring maintenance from a
logical domain
Releasing the SPARC M12-2S requiring
maintenance from the physical partition
Releasing the SPARC M12-2S requiring
maintenance from the building block
configuration
Reference
"10.6.1 Incorporating the SPARC
M12-2S Into the Physical Partition Using
PPAR DR"
"10.7 Incorporating I/O Resources Into a
Logical Domain"
"9.2 Checking the Operation Status and
Resource Usage Status of Oracle
"Precautions for OPNL
Reference
"9.2 Checking the Operation Status and
Resource Usage Status of Oracle
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
"9.3 Releasing I/O Resources From a
Logical Domain"
"9.4.3 Dynamically Releasing the
SPARC M12-2S From the Physical
Partition"
"9.6.1 Releasing the SPARC M12-2S
From the Building Block
Solaris"
replacement" in "7.1
Solaris"
Configuration"