Table of Contents
Advertisement
Figure 21-7 Label Affixing Positions on the XSCF DUAL Control Cable
Note - Affix a label 5 cm (2 in.) away from the XSCF DUAL control cable connector.
2.
Connect the XSCF DUAL control cable.
Figure 21-8 Connecting the XSCF DUAL Control Cable
Place the server in the hot state.
3.
To perform maintenance after every SPARC M12-2S was placed in the cold state
without using the maintenance menu, install the power cords of every SPARC
M12-2S. For details on installing the power cord on the PSU, see
Installing a Power
Cord."
Chapter 21 Maintaining the XSCF DUAL Control Cable
"10.1.1
515
Advertisement
Table of Contents
