Table of Contents
Advertisement
14.4
Installing a FANU or the FANBPU
This section describes the procedure for installing a FANU or FANBPU.
14.4.1
Installing the FANBPU
Install the FANBPU when the server is in the cold state.
Note - If you are replacing only a FANU, this step is not necessary.
1.
Insert the FANBPU into the server.
Align the bottom left and right corners of the FANBPU with its slot inside the
server, and insert the FANBPU along the slot.
Note - Make sure that the FANBPU has no FANUs in it when you insert it into the server.
Figure 14-6 Installing the FANBPU
2.
Secure the FANBPU.
Tighten the three fixing screws to secure the FANBPU.
408
Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
Advertisement
Table of Contents
