System-Stopped/Cold Replacement Workflow Of The Opnl - Fujitsu Oracle SPARC M12-2 Service Manual

Table 4-58 System-Stopped/Cold Replacement Procedure of the HDDBPU (continued)
Work
Order
5
6
7
8
9
10
11
12
13
14
4.6.8 System-Stopped/Cold Replacement Workflow of
the OPNL
Before replacing the OPNL, see
Precautions for FRU
Table 4-59
Table 4-59 System-Stopped/Cold Replacement Procedure of the OPNL
Work
Order
1
2
3
4
Task
Switching the mode switch on the OPNL
to Service
Removing the power cords of all the
SPARC M12-2/M12-2S units
Removing the HDDBPU from the SPARC
M12-2/M12-2S
Installing the HDDBPU in the SPARC
M12-2/M12-2S
Installing the power cords on all the
SPARC M12-2/M12-2S units
Diagnosing all the SPARC M12-2/M12-2S
units
Confirming that there is no problem with
the replacement HDDBPU
Switching the mode switch on the OPNL
to Locked
Powering on the physical partitions
Checking the operating condition of the
system
Replacement."
shows the workflow for system-stopped/cold replacement of the OPNL.
Task
Checking the operating condition of the
system
Confirming the OPNL to be replaced
Checking the operation status of the
SPARC M12-2/M12-2S that houses the
OPNL to be replaced
Stopping all physical partitions
Reference
"2.3.2 OPNL Control
"9.8.2 Removing the Power
"16.3 Removing the HDDBPU or
"16.4 Installing the HDDBPU or
"10.1.1 Installing a Power
"10.5.1 Diagnosing the SPARC M12
Hardware"
"10.5.3 Checking the FRU Status After
Maintenance"
"2.3.2 OPNL Control
"10.9.1 Starting the System With an
XSCF Command"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"Precautions for OPNL
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"8.2 Troubleshooting"
"2.4 Understanding the LED
"9.5.2 Stopping All Physical
Chapter 4 FRU Replacement Workflows
Function"
Cords"
OPNL"
OPNL"
Cord"
Function"
Domains"
replacement" in "7.1
Domains"
Indications"
Partitions"
139