Fujitsu Oracle SPARC M12-2 Service Manual page 217

6.2.2 Active/Cold Removal Workflow of the HDD/SSD
You can perform active/cold removal of the HDD/SSD in the following configuration:
Configuration connecting two or more SPARC M12-2S units to a physical partition
■
Before removing the HDD/SSD, see
Precautions for FRU
Table 6-5
Table 6-5 Active/Cold Removal Procedure of the HDD/SSD
Work
Order
1
2
3
4
5
6
7
8
9
10
11
12
Reduction."
shows the workflow for active/cold removal of the HDD/SSD.
Task
Checking the operating condition of the
system
Checking the logical domain assignment
status of CPU resources mounted in the
SPARC M12-2S requiring maintenance
Checking the logical domain assignment
status of memory resources mounted in
the SPARC M12-2S requiring maintenance
Releasing the logical domain assignment
of all the HDD/SSD and PCIe cards
mounted in the SPARC M12-2S requiring
maintenance
Releasing the HDD/SSD and PCIe cards
mounted in the SPARC M12-2S requiring
maintenance, from the system
Confirming that you can release the
SPARC M12-2S
Releasing the SPARC M12-2S requiring
maintenance from the physical partition
Switching the mode switch on the OPNL
to Service
Confirming that the physical partition
and logical domains continue operating
Releasing the SPARC M12-2S requiring
maintenance from the building block
configuration
Removing the HDD/SSD from the
SPARC M12-2S
Installing a filler unit in the SPARC M12-2S
"Precautions for HDD/SSD
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
"9.3 Releasing I/O Resources From a
Logical Domain"
"9.4 Enabling the Removal of
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.4.3 Dynamically Releasing the
SPARC M12-2S From the Physical
Partition"
"2.3.2 OPNL Control
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.6.1 Releasing the SPARC M12-2S
From the Building Block
"15.3.1 Removing an
"15.4.2 Installing a Filler
Chapter 6 FRU Removal Workflows
removal" in "7.3
Domains"
Hardware"
Domains"
Function"
Domains"
Configuration"
HDD/SSD"
Unit"
195