Table of Contents
Advertisement
Table 6-20 System-Stopped/Hot Removal Procedure of the HDD/SSD
Work
Order
1
2
3
4
5
6
7
8
9
10
11
12
13
14
*1 Reassign I/O resources to logical domains as required. For details, see "3.2.18 Configuring an I/O Device" in
the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.
6.5.3
System-Stopped/Hot Removal Workflow of the PCI
Expansion Unit
Table 6-21
unit.
Task
Checking the operating condition of the
system
Checking the usage status of the
HDD/SSD to be removed
Releasing the HDD/SSD resources
assigned to logical domains
Confirming that you can release the
HDD/SSD to be removed (*1)
Saving logical domain configuration
information
Powering off all physical partitions
Switching the mode switch on the OPNL
to Service
Removing the HDD/SSD from the
SPARC M12-2/M12-2S
Installing the filler unit in the SPARC
M12-2/M12-2S
Powering on all physical partitions
Confirming that there is no problem with
the system from which the HDD/SSD was
removed
Switching the mode switch on the OPNL
to Locked
Checking the operating condition of the
system (*1)
Saving logical domain configuration
information
shows the workflow for system-stopped/hot removal of a PCI expansion
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.2.3 Checking the Usage of the
HDD/SSD"
"9.3 Releasing I/O Resources From a
Logical
Domain"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.1.1 Saving Logical Domain
Configuration
Information"
"9.5.2 Stopping All Physical
"2.3.2 OPNL Control
Function"
"15.3.1 Removing an
HDD/SSD"
"15.4.2 Installing a Filler
"10.9.1 Starting the System With an
XSCF
Command"
"10.5.3 Checking the FRU Status After
Maintenance"
"2.3.2 OPNL Control
Function"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.1.1 Saving Logical Domain
Configuration
Information"
Chapter 6 FRU Removal Workflows
Domains"
Domains"
Partitions"
Unit"
Domains"
217
Advertisement
Table of Contents
