Location No.
1
2
20.2
Before Maintenance on an XBU
When replacing an XBU, perform one of the maintenance procedures listed below.
-
4.4.14 Inactive/Cold Replacement Workflow of the XBU
-
4.6.14 System-Stopped/Cold Replacement Workflow of the XBU
Caution - Before you handle any unit, be sure to wear a wrist strap to ground any
static electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be seriously damaged. For details, see
Precautions on Static
20.3
Removing an XBU
This section describes the procedure for removing an XBU.
Place the server in the cold state.
1.
For details on handling power cords, see
502
Fujitsu SPARC M12-2/M12-2S Service Manual ・ January 2023
Unit
XBU
XBU
Electricity."
Slot
XBU#0
XBU#1
"9.8.2 Removing the Power
"1.5
Cords."