Table of Contents
Advertisement
Table 5-26 System-Stopped/Cold Addition Procedure of a PCI Expansion Unit
Work
Task
Order
1
Powering off all physical partitions
2
Switching the mode switch on the OPNL
to Service
3
Removing the power cords of all the
SPARC M12-2/M12-2S units
4
Removing the PCICS from the SPARC
M12-2/M12-2S
5
Removing the PCIe card filler from the
PCICS
6
Installing the link card in the PCICS
7
Installing the link card in the SPARC
M12-2/M12-2S
8
Connecting a PCI expansion unit to the
link card
9
Installing a PCIe card in the PCI
expansion unit.
10
Connecting the power cords of all the
SPARC M12-2/M12-2S units
11
Diagnosing the SPARC M12-2/M12-2S
with the added PCI expansion unit
12
Confirming that there is no problem with
the added PCI expansion unit
13
Switching the mode switch on the OPNL
to Locked
14
Powering on all physical partitions
15
Assigning the I/O resource to a logical
domain
Reference
"9.5.2 Stopping All Physical
"2.3.2 OPNL Control
Function"
"9.8.2 Removing the Power
"12.3.1 Enabling the Removal of a PCIe
Card"
"12.3.2 Removing a PCIe Card or PCIe
Card
Filler"
"12.4.1 Installing a PCIe Card or PCIe
Card
Filler"
"12.4.2 Incorporating a PCIe Card Into
the
System"
"4.2 Connecting Cables to the PCI
Expansion Unit" in the Fujitsu SPARC
M12-2 Installation Guide
or
"5.2 Connecting Cables to the PCI
Expansion Unit" in the Fujitsu SPARC
M12-2S Installation Guide
"12.4.1 Installing a PCIe Card or PCIe
Card
Filler"
"10.1.1 Installing a Power
"10.5.1 Diagnosing the SPARC M12
Hardware"
"10.5.3 Checking the FRU Status After
Maintenance"
"2.3.2 OPNL Control
Function"
"10.9.1 Starting the System With an
XSCF
Command"
"3.2 Operations and Commands Related
to Logical Domain Configurations" in the
Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration
Guide
Chapter 5 FRU Addition Workflows
Partitions"
Cords"
Cord"
185
Advertisement
Table of Contents
