Fujitsu Oracle SPARC M12-2 Service Manual page 242

Table 6-22 System-Stopped/Cold Removal Procedure of a PCIe Card
Work
Order
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
*1 Reconfigure logical domains as required. For details, see "Chapter 3 Operations for Domain Configuration" in
the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide. If you have reconfigured a
logical domain, save the logical domain configuration information.
220 Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
Task
Checking the operating condition of the
system
Releasing the assignment of the I/O
resources of the PCIe card to be removed
Confirming that you can remove the PCIe
card to be removed (*1)
Saving logical domain configuration
information
Powering off all physical partitions
Switching the mode switch on the OPNL
to Service
Removing the power cords of all the
SPARC M12-2/M12-2S units
Removing the PCICS in which the PCIe
card to be removed is mounted from the
SPARC M12-2/M12-2S
Removing the PCIe card from the PCICS
Installing a PCIe card filler in the PCICS,
and installing the PCICS in the SPARC
M12-2/M12-2S
Installing the power cords of all the
SPARC M12-2/M12-2S units
Powering on the physical partition
containing the SPARC M12-2/M12-2S that
underwent maintenance
Confirming that there is no problem with
the system from which the PCIe card was
removed
Switching the mode switch on the OPNL
to Locked
Checking the operating condition of the
physical partition and logical domains (*1)
Saving logical domain configuration
information
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.3 Releasing I/O Resources From a
Logical Domain"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.1.1 Saving Logical Domain
Configuration Information"
"9.5.2 Stopping All Physical
"2.3.2 OPNL Control Function"
"9.8.2 Removing the Power
"12.3.1 Enabling the Removal of a PCIe
Card"
"12.3.2 Removing a PCIe Card or PCIe
Card Filler"
"12.4.1 Installing a PCIe Card or PCIe
Card Filler"
"10.1.1 Installing a Power
"10.9.1 Starting the System With an
XSCF Command"
"10.5.3 Checking the FRU Status After
Maintenance"
"2.3.2 OPNL Control Function"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.1.1 Saving Logical Domain
Configuration Information"
Domains"
Domains"
Partitions"
Cords"
Cord"
Domains"