Table of Contents
Advertisement
The pull-tab differs in shape according to the type of crossbar cable. For details,
see
Figure 19-9
and
Note - Remove crossbar cables one by one.
Note - When you maintain the crossbar box, you may remove the crossbar cables with the
power on.
Note - The cables at the rear of the crossbar box are bundled together and fastened to the
right-hand cable support with a hook-and-loop fastener. To remove the crossbar cables,
remove the hook-and-loop fastener from the cable support.
Figure 19-6 Removing the Crossbar Cable (SPARC M12-2S)
Figure
19-10.
Chapter 19 Maintaining the Crossbar Cable
495
Advertisement
Table of Contents
