Table of Contents
Advertisement
Table 6-9 Active/Cold Removal Procedure of the SPARC M12-2S (continued)
Work
Order
6
7
8
9
10
11
12
13
14
15
16
*1 Reconfigure logical domains as required. For details, see "Chapter 3 Operations for Domain Configuration" in
the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.
6.3
Inactive/Hot Removal Workflows
This section describes the workflows for inactive/hot removal of the FRUs mounted
in the SPARC M12-2S.
Before performing removal work, be sure to check the notes on maintenance work in
the Fujitsu SPARC M12 Product Notes of the XCP version used.
202
Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
Task
Releasing the logical domain assignment
of the I/O resources of the SPARC
M12-2S to be removed
Releasing the I/O devices of the SPARC
M12-2S to be removed, from the system
Releasing the assignment, to logical
domains, of CPU resources (*1)
Releasing the assignment, to logical
domains, of memory resources (*1)
Confirming that you can release the
SPARC M12-2S to be removed
Releasing the SPARC M12-2S from the
physical partition
Checking the operating condition of the
system after releasing the SPARC
M12-2S (*1)
Saving logical domain configuration
information
Switching the mode switch on the OPNL
to Service
Releasing the SPARC M12-2S from the
building block configuration
Switching the mode switch on the OPNL
to Locked
Reference
"9.3 Releasing I/O Resources From a
Logical
Domain"
"9.4 Enabling the Removal of
"Chapter 3 Operations for Domain
Configuration" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
"Chapter 3 Operations for Domain
Configuration" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
"9.2 Checking the Operation Status and
Resource Usage Status of Oracle
"9.4.3 Dynamically Releasing the
SPARC M12-2S From the Physical
Partition"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.1.1 Saving Logical Domain
Configuration
Information"
"2.3.2 OPNL Control
Function"
"9.7 Removing the SPARC
"2.3.2 OPNL Control
Function"
Hardware"
Solaris"
Domains"
M12-2S"
Advertisement
Table of Contents
