Fujitsu Oracle SPARC M12-2 Service Manual page 279

Physical device information
------------------------------------------------------------------------
Initiator at ID #0
Device is a Hard disk
Enclosure # : 0
Slot # : 0
SAS Address : 0000000-0-0000-0000
State : Failed (FLD)
Manufacturer : TOSHIBA
Model Number : MBF2600RC
Firmware Revision : 3706
Serial No : EA25PC700855
GUID : N/A
Protocol : SAS
Drive Type : SAS_HDD
(Omitted)
*1 RAID volume information
*2 Degraded operation of the RAID volume
*3 Physical device information
*4 Indicating a fault
Checking the PCI expansion unit status
To check for faulty FRUs in the PCI expansion unit, log in to the XSCF shell and
execute the showhardconf and ioxadm commands.
XSCF> showhardconf
(Omitted)
PCI#0 Status:Normal; Name_Property:pci;
+ Vendor-ID:108e; Device-ID:9020;
+ Subsystem_Vendor-ID:0000; Subsystem-ID:0000;
+ Model:;
+ Connection:2003;
PCIBOX#2003; Status:Normal; Ver:1150h; Serial:PZ21332003;
+ FRU-Part-Number:;
IOB Status:Normal; Serial:PP133001CW
LINKBOARD Status:Normal; Serial:PP140801Z8 ;
PCI#11 Name_Property:pci;
FANBP Status:Normal; Serial:PP13310038
PSU#0; Status:Normal; Serial:FEJD1245001507;
(*3)
(*4)
+ FRU-Part-Number:CA20365-B66X 020AM/7061033
+ FRU-Part-Number:CA20365-B60X 009AD/7061035
+ Vendor-ID:104c; Device-ID:8231;
+ Subsystem_Vendor-ID:0000; Subsystem-ID:0000;
+ Model:;
+ FRU-Part-Number:CA20365-B68X 005AD/7061025
+ FRU-Part-Number:CA01022-0750-D/7060988
;
;
;
Chapter 8 Preparation for Maintenance
;
;
;
257