Figure 12-5 Removing the PCIe Card
Caution - When removing the PCICS, be careful not to bend its lever. If the lever is
bent, you may not be able to secure the PCICS to the server or PCI expansion unit.
Note - Place the removed PCICS on the grounded ESD mat to ground any static electricity.
12.3.2
Removing a PCIe Card or PCIe Card Filler
This section describes the procedure for removing a PCIe card or PCIe card filler
mounted in the PCICS.
1.
Remove the PCIe card cover.
Remove the PCIe card cover by pinching its lock (A in
fingers and lifting the cover while pushing the lock inside.
Figure 12-6 Removing the PCIe Card Cover
Figure
12-6) with your
2
1
1
A
Chapter 12 Maintaining PCIe Cards
389