Fujitsu Oracle SPARC M12-2 Service Manual page 428

Figure 14-2 Latch of the FANU
3. Remove the FANU.
Hold the latch of the FANU, and pull out the FANU from the FANBPU.
Figure 14-3 Removing a FANU
14.3.2 Removing the FANBPU
This section describes the procedure for removing the FANBPU.
Note - If you are replacing only a FANU, this step is not necessary.
Note - Before removing the FANBPU, remove all the FANUs from it.
Loosen the three fixing screws of the FANBPU.
1.
406 Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
A