Insert the power cord all the way straight into the PSU.
Figure 10-1 Installing the Power Cord
2.
Bundle the power cords with the cable clamp, and then secure the cable
clamp.
Bundle the power cords with the cable clamp, and then slide the cable clamp
toward the PSU to firmly secure the power cords.
Figure 10-2 Securing the Power Cords
10.1.2
Securing the Cable Support
After completing the FRU maintenance at the rear of the SPARC M12, lift and secure
the cable support.
326
Fujitsu SPARC M12-2/M12-2S Service Manual ・ January 2023