Fujitsu Oracle SPARC M12-2 Service Manual page 204

Table 5-23 System-Stopped/Cold Addition Procedure of the HDD/SSD
Work
Order
1
2
3
4
5
6
7
8
9
10
11
5.6.3 System-Stopped/Cold Addition Workflow of the
CMUU
Before adding the CMUU, see
Precautions for FRU
Table 5-24
182 Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
Task
Powering off all physical partitions
Switching the mode switch on the OPNL
to Service
Removing the power cords of all the
SPARC M12-2/M12-2S units
Removing the filler unit from the SPARC
M12-2/M12-2S
Installing an HDD/SSD in the SPARC
M12-2/M12-2S
Connecting the power cords of all the
SPARC M12-2/M12-2S units
Diagnosing the SPARC M12-2/M12-2S
with the added HDD/SSD
Confirming that there is no problem with
the added HDD/SSD
Switching the mode switch on the OPNL
to Locked
Powering on all physical partitions
Assigning the I/O resource to a logical
domain
Expansion."
shows the workflow for system-stopped/cold addition of the CMUU.
Reference
"9.5.2 Stopping All Physical
"2.3.2 OPNL Control
"9.8.2 Removing the Power
"15.3.2 Removing a Filler
"15.4.1 Installing an
"10.1.1 Installing a Power
"10.5.1 Diagnosing the SPARC M12
Hardware"
"10.5.3 Checking the FRU Status After
Maintenance"
"2.3.2 OPNL Control
"10.9.1 Starting the System With an
XSCF Command"
"3.2 Operations and Commands Related
to Logical Domain Configurations" in the
Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration
Guide
"Precautions for CMUU
Partitions"
Function"
Cords"
Unit"
HDD/SSD"
Cord"
Function"
expansion" in "7.2