Maintenance
13.7.3
Central Position of Engine Sensor
Fig. 250
The sensor "Central Position of Engine" (1) can be found on the right machine side above the V-
belt and records the data for the position of the servomotor centre.
Setting:
1. Loosen the counter nut (2)
2. Adjust the sensor (1) in the oblong hole in that way that the link (3) stops in the shown
position when the tension roller moves from the top to the bottom.
3. Tighten the counter nut (2)
Pos: 64.32.21 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
288
2
1
FOR00039
3
FOR00040