Krone Isobus Terminal - Krone Fortima F 1250 Original Operating Instructions

KRONE ISOBUS Terminal

Pos: 52.1 /Überschriften/Überschriften 1/K-O/KRONE ISOBUS-Terminal @ 185\mod_1379578612990_78.docx @ 1598079 @ 1 @ 1
8 KRONE ISOBUS Terminal
Pos: 52.2 /BA/Info-Center/CCI-ISOBUS-Terminal/Hinweis Im weiteren Verlauf Terminal auch als Bedieneinheit bezeichnet @ 46\mod_1281680416671_78.docx @ 445465 @ @ 1
Note
In the operating instructions which follow, the terminal will also be referred to as the "control
unit".
Pos: 52.3 /BA/Sicherheit/7. Gefahrenhinweise alt/Achtung - Bedieneinheit schützen @ 0\mod_1200308247867_78.docx @ 39598 @ @ 1
Caution! - Protect Control Unit.
Effect: Damage to the control unit
• The control unit must be protected against water.
• If the machine is not used for an extended period of time (for example during the winter),
the control unit must be stored in a dry place.
• For mounting and repair jobs, especially for welding jobs on the machine, disconnect the
power supply to the control unit. Overvoltage can damage the control unit.
Pos: 52.4 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Rundballenpressen/Allgemeine Beschreibung (Die elektronische Ausstattung der Maschine ........) Text/Bild Fortima @ 122\mod_1344434184666_78.docx @ 1116275 @ @ 1
F7
F8
F9
F10
F11 F11
F12
Fig.104
The electronic equipment of the machine consists essentially of the job computer (1), the
terminal (3) and the control and function elements.
The job computer (1) is located on the front right of the machine under the side hood.
Its functions are:
• Control of the actuators installed on the machine
• Sensor system/actuator diagnostics
• Bale counter
• Transfer of alarm messages
The control unit (3) communicates information to the driver and performs settings to operate the
machine. This information is received and further processed by the job computer.
Pos: 52.5 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
142
ESC
3
F1
F2
F3
F4
F5
F6
CC000013
1
RPK50610_1