Pos: 52.85 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Rundballenpressen/Hauptmenüs/Hauptmenü 3 Handbedienung/Menü 3-2 Position Netzmotor Fortima @ 80\mod_1315307400996_78.docx @ 702569 @ 3 @ 1
8.8.1
Menu 3-2 "Position of net motor"
Fig. 136
Calling the menu
Main menu 3 "Manual operation" is called
•
Press function key
grey.
•
Press function key
The following current states of the machine are shown in the display:
Moving the motor
•
Press function key
•
Press function key
•
Press function key
•
Press function key
Pos: 52.86 /BA/Info-Center/Rundballenpresse/Hauptmenü 3 Handbedienung/WARNUNG! – Quetschgefahr durch sich bewegenden Motor @ 187\mod_1380102243196_78.docx @ 1609031 @ @ 1
WARNING! – Crush hazard due to moving motor!
Personal injury.
•
To prevent injury, do not stand in the area of the extending or retracting motor.
Pos: 52.87 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
or
to select menu 3-2 (
= Motor in the centre position
= Positions not defined
to move the motor in.
to move the motor out.
to close the currently displayed menu
a little longer to call the basic screen
CC000462
KRONE ISOBUS Terminal
). The symbol is highlighted in
171