Commissioning
Pos: 46.19.19 /BA/Erstinbetriebnahme/Rundballenpresse/Ballenauswerfer/7_Zugfeder und Augenschraube einhängen @ 191\mod_1381923248446_78.docx @ 1633876 @ @ 1
Fig.31
•
Hook the tension spring (1) into the link (5) on the holding plate.
•
Hook the eye bolt (3) into the tension spring (1) and guide it through the bore hole (2).
•
Secure with disc and nut (4).
•
Tighten the nut (4) until the bale ejector swings safely into the basic setting after depositing
the bale.
Pos: 46.19.20 /BA/Erstinbetriebnahme/Rundballenpresse/Ballenauswerfer/8_Sicherheitsfolie anbringen @ 192\mod_1381932917444_78.docx @ 1634412 @ @ 1
1
Fig.32
•
Attach the safety sheet (1) in the middle on the rear cross bar of the bale ejector (2).
Pos: 46.20 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
66
5
1
3
2
4
2
VP700016