Krone Fortima F 1250 Original Operating Instructions page 299

Pos: 64.79 /Abkürzungen /Abkürzungen sprachneutral/Rundballenpressen/Fortima V 1500 (MC) / V 1800 (MC)_sprachneutral @ 226\mod_1392720827776_0.docx @ 1826878 @ @ 1
Fortima V 1500 (MC) / V 1800 (MC)
Pos: 64.80 /BA/Wartung/Rundballenpresse/Spannen Ketten Walzenantrieb_V1500 (MC), V1800 (MC) @ 34\mod_1256111001113_78.docx @ 325866 @ @ 1
Roller drive
Fig. 260
The roller drive is located on the right side of the machine.
To check the chain tension:
The length of the spring when tensioned must be a = 90 mm.
To correct the chain tension:
• Turn the nut (2) until the dimension a = 90 mm is set.
Pos: 64.81 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @ @ 1
Pos: 64.82 /BA/Wartung/Rundballenpresse/Spannen Ketten Förderschnecke @ 34\mod_1256108241894_78.docx @ 325841 @ @ 1
Auger conveyor drive
Fig. 261
The auger conveyor drive is located on the pick-up on the left side of the machine.
To check the chain tension:
The length of the spring when tensioned must be a = 30 mm.
To correct the chain tension:
• Turn the nut (1) until the dimension a = 30 mm is set.
Pos: 64.83 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
1
2
a
1
RP-A-004
a
RBV06280
Maintenance
299