Operation
Pos: 60.45.9 /BA/Bedienung /Rundballenpresse/Reversieren/b) Bei Ausführung mit hydraulischer Reversiereinrichtung @ 194\mod_1383558077702_78.docx @ 1649839 @ @ 1
b) For version with hydraulic reversing device
Pos: 60.45.10 /BA/Bedienung /Rundballenpresse/Reversieren/Hydraulisch reversieren - Vorgehensweise @ 181\mod_1377095013720_78.docx @ 1555305 @ @ 1
•
Turn off the PTO shaft.
•
Wait until all machine parts are stationary.
•
Open the stop cock in the control valve hydraulic hose.
•
Apply pressure to the hydraulic cylinder; the cylinder extends.
Depressurise the hydraulic cylinder; the cylinder retracts.
•
Repeat this operation around 4-5 times to turn back the feed rotor by around ¼ turn.
•
Reset the machine.
•
Turn off the tractor engine and remove the ignition key.
•
Manually remove any remaining crops from the feed rotor or the pick-up.
•
Depressurise the hydraulic cylinder.
•
Check that the reversing device is in idle position.
•
Close the stop cock in the control valve hydraulic hose.
•
Start the engine and turn on the PTO shaft.
Pos: 60.46 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
242