Krone Fortima F 1250 Original Operating Instructions page 99

Pos: 50.23.15 /BA/Info-Center/Rundballenpresse/Grundbild/Anzeigen im Hauptfenster_Fahrtrichtung @ 186\mod_1379929071082_78.docx @ 1602561 @ @ 1
Symbol
Pos: 50.23.16 /BA/Info-Center/Rundballenpresse/Grundbild/Anzeigen im Hauptfenster_Ballendurchmesser/-festigkeit erreicht_Fortima @ 186\mod_1379931530574_78.docx @ 1602698 @ @ 1
Pos: 50.23.17 /BA/Info-Center/Rundballenpresse/Grundbild/Anzeigen im Hauptfenster_Netz/Garn, Messer_Fortima @ 186\mod_1379934561917_78.docx @ 1602815 @ @ 1
Pos: 50.23.18 /BA/Info-Center/Rundballenpresse/Grundbild/Anzeigen im Hauptfenster_Ist/Soll Ballendurchmesser/-festigkeit_Fortima @ 186\mod_1379934295791_78.docx @ 1602786 @ @ 1
120/120 cm
48/50 %
Pos: 50.23.19 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
Meaning
Correcting direction of travel to the
left
Correcting direction of travel to the
right
Setpoint value bale diameter reached
(Fortima F)
Setpoint value bale firmness reached
(Fortima V)
Net is fed
Tying has not been tied
Tying process is active
Tying process has been stopped
Tying has been cut off
Tying has not been cut off
Tying completed
Twine is fed
Tying has not been tied
Tying process is active
Tying process has been stopped
Tying has been cut off
Tying has not been cut off
Tying completed
Blades are swivelled in
Blades are not swivelled in
Actual value and setpoint value bale
diameter in cm
Actual value and setpoint value bale
firmness as percentage
KRONE operation terminal Beta
Information
Due to uneven filling, the bale is
thicker on one side.
The size of the arrow and the number
(1-3) signalize to what extent the
direction of travel must be corrected.
flashing
Net tying
Twine tying
With Multicut
Fortima V
Fortima F
99