Pos: 62.33 /Überschriften/Überschriften 3/K-O/Netzbremse lösen @ 33\mod_1253798601910_78.docx @ 318125 @ 3 @ 1
12.1.9
Loosening the net brake
Pos: 62.34 /BA/Einstellungen/Rundballenpresse/Bild Netzbremse lösen @ 33\mod_1253797975457_78.docx @ 317897 @ @ 1
Fig. 225
Pos: 62.35 /BA/Bedienung /Rundballenpresse/Netz-Garnbindung/Garnbremse lösen @ 33\mod_1253782791316_78.docx @ 317236 @ @ 1
1. Move the tension arm (2) from below into central position.
In this position
•
the tension spring (3) must not be tensioned,
•
tension on the wire rope (4) must be slightly released.
Pos: 62.36 /BA/Einstellungen/Rundballenpresse/Netzbreithalter @ 33\mod_1253798790863_78.docx @ 318149 @ 3 @ 1
12.1.10
Net spreader
Fig. 226
In order to make use of the optimum width of the net, the net spreader (2) can be turned:
1. Loosen the right and left screw (1).
•
Turn the tube towards the back. The net is drawn extremely wide
•
Turn the tube towards the front. The net is not drawn as wide (use for types of nets that
are not very wide)
2. Retighten the right and left screw (1).
Pos: 62.37 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
4
3
2
1
2
VP-3-018
1
RP16010
Settings
267