Pos: 50.23.7 /Überschriften/Überschriften 3/F-J/Hand- oder Automatikbetrieb einstellen @ 186\mod_1380002466289_78.docx @ 1606045 @ 3 @ 1
7.5
Selecting manual or automatic mode
Pos: 50.23.8 /BA/Info-Center/Rundballenpresse/Grundbild/Hand- oder Automatikbetrieb einstellen @ 250\mod_1396882958015_78.docx @ 1935805 @ @ 1
After switching on control terminal, operating mode "Manual mode" is set by default.
Press
The symbol above the
Symbol
Pos: 50.23.9 /Überschriften/Überschriften 3/P-T/Pick-up oder Messerboden auswählen @ 250\mod_1396882773657_78.docx @ 1935287 @ 3 @ 1
7.5.1
Selecting Pick-up or Blade Base
Pos: 50.23.10 /BA/Info-Center/Rundballenpresse/Hand-/Automatikbetrieb/Pick-up oder Messerboden auswählen @ 186\mod_1379949287891_78.docx @ 1605665 @ @ 1
The valve for pick-up is selected as standard after switching on the control terminal.
Press
The symbol above the
Symbol
Pos: 50.23.11 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
key to change between "Manual mode" and "Automatic mode".
key indicates the set operating mode:
Function
Manual mode
–
The tying process must be triggered manually by pressing
Automatic mode
–
The tying process is triggered automatically when the target filling is reached.
–
The start of tying process can be decelerated by an adjustable amount of time,
refer to chapter 1-9 "Tying Start Deceleration".
–
Tying process starts immediately after
independently of the set tying start deceleration.
key to change between pick-up valve and blade base valve.
key displays the set valve:
Function
Pick-up
The control unit can be operated to lift and lower the pick-up.
Blade base
The control unit can be operated to lift and lower the blade drawer.
KRONE operation terminal Beta
key.
key is pressed in automatic mode -
97