Main Gearbox; Oil Level Check And Oil Change On Main Gearbox - Krone Fortima F 1250 Original Operating Instructions

Pos: 64.48 /Überschriften/Überschriften 2/F-J/Hauptgetriebe @ 0\mod_1197005740033_78.docx @ 15416 @ 2 @ 1
13.11

Main gearbox

Pos: 64.49 /BA/Wartung/Rundballenpresse/Hauptgetriebe befindet sich im vorderen Querträger der Rundballenpresse. @ 240\mod_1395156439885_78.docx @ 1892049 @ @ 1
The main gearbox is located in the front crossbeam of the round baler.
Pos: 64.50 /BA/Wartung/Rundballenpresse/Bild Hauptantrieb VP @ 34\mod_1256042758268_78.docx @ 325491 @ @ 1
Fig. 254
Pos: 64.51 /BA/Wartung/Ölkontrolle_Wechsel/Ölwechsel / Ölkontrolle:Legende zu Grafik Kontrollschraube / Ablassschraube @ 194\mod_1383299451132_78.docx @ 1648045 @ @ 1
1) Inspection screw / control hole
Pos: 64.52 /Überschriften/Überschriften 3/K-O/Ölstandskontrolle und Ölwechsel am Hauptgetriebe @ 178\mod_1373976054162_78.docx @ 1522314 @ 3 @ 1
13.11.1

Oil Level Check and Oil Change on Main Gearbox

Pos: 64.53 /BA/Wartung/Hinweis - Ölstandskontrolle und Ölwechsel bei waagerechter Stellung der Maschine vornehmen @ 12\mod_1224746945841_78.docx @ 153501 @ @ 1
Note
Perform oil level check and change the oil while the machine is in a horizontal position!
Pos: 64.54 /BA/Wartung/Ölkontrolle_WechselÖlkontrolle NEU über Kontrollschraube ohne Einfüllschraube @ 158\mod_1364483633589_78.docx @ 1391741 @ @ 1
Oil level check:
• Screw out inspection screw.
• Oil level up to control hole.
If the oil reaches the control hole:
• Screw in the inspection screw and tighten it securely.
If the oil does not reach the control hole:
• Top up oil via control hole until the control hole is reached.
• Screw in the inspection screw and tighten it securely.
Pos: 64.55 /BA/Wartung/Ölkontrolle_WechselÖlwechsel NEU ohne Einfüllschraube @ 158\mod_1364483760090_78.docx @ 1391770 @ @ 1
Oil change:
Collect escaping oil in a suitable container.
• Screw out oil drain plug and drain the oil.
• Screw out inspection screw.
• Screw in oil drain plug and tighten it securely.
• Top up new oil via control hole until the control hole is reached.
• Screw in the inspection screw and tighten it securely.
Pos: 64.56 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
1
2
RBV05090_1
2) Drain plug
Maintenance
293